Does anyone know all of the possible ## codes for the Treo 650 with and without modified dialer pads?

I know of

-##TETHERED
-##RTN
-##DATA
-##DEBUG

What new ## codes do the new dialer programs enable and what other ## codes exist?

Thanks

Ok, this is going to be the master list here... I'll update this post if I find more etc...
--------------------
-## Codes for the Treo 650
Enter these from the phone in the format:
-##"CODE"# - Upon pressing the last # the code will be ran
--------------------------

-##RTN - Shows runtime and info on phone
-##DEBUG - Shows the cellular radio debug info, signal etc...
-##PRI - Allows you to change the PRI of the phone
-##AKEY - Allows you to set a AKEY for the phone
-##LOOPBACK - Has the loopback test calls menu
-##"MSL" where "MSL" is the 6 digit code given to you for your phone - programs your phone
-##PREV - Allows you to set the p-rev of your phone
-##DATA - Main programming of Sprint vision options
-##ON - Phone on
-##OFF - Phone off
-##PASS - Phone off and Passthrough enabled
-##PASSOFF = Passthrough disabled
-##UPST - Bootloader
-##DIAG - Passthrough enabled
-##744 - ??? Flashes screen but doesn't show anything
-##TETHERED - Tethered Mode On
-##ERR -Last Error code
-##88722366 = ?TRACEON (Trace Enabled)
-##887223633 = ?TRACEOFF (Trace Disabled)
-##28722366 = ?TRACEON (Trace Enabled)
-##287223633 = ?TRACEOFF (Trace Disabled)
-##798722366 = ??TRACEON (Trace Enabled)
-##7987223633 = ??TRACEOFF (Trace Disabled)
-##TIME -Current time

What does this do for my treo 650. Sorry I am new.

I am interested in what will the following ##codes do, in simple terms please
-##PREV - Allows you to set the p-rev of your phone
-##PASS - Phone off and Passthrough enabled
-##PASSOFF = Passthrough disabled
-##UPST - Bootloader
-##DIAG - Passthrough enabled
-##744 - ??? Flashes screen but doesn't show anything
-##TETHERED - Tethered Mode On
-##88722366 = ?TRACEON (Trace Enabled)
-##887223633 = ?TRACEOFF (Trace Disabled)
-##28722366 = ?TRACEON (Trace Enabled)
-##287223633 = ?TRACEOFF (Trace Disabled)
-##798722366 = ??TRACEON (Trace Enabled)
-##7987223633 = ??TRACEOFF (Trace Disabled)

When I tried to Sync up my treo 650 to my computer. my phone either shuts off when I press the button. or if I hold it the screen goes into red, green, blue, white bars. WHAT IS HAPPENING?

How do I punch in Letters? I mean what screen do I need to be in to make these codes work?

That doesn't sound related to ## codes, but you are seeing the bootloader if you hold the hotsync button while it resets.

If you phone is resetting when you attempt to hotsync, please start a new thread about that and we'll see if we can get you some help. It might need a hard reset...

Finally, you asked what screen to enter the ## codes from. Goto the phone screen... Dial the numbers if you want to play with them.

You have to be in the phone app. The letters corispnond to the letters on the on-screen dial pad.

Timmay

i am a noob and i just wanted to understand more about the ##codes

[quote="gt5l"]I am interested in what will the following ##codes do, in simple terms please




ok so ##7738# (PREV) allows you to set the p-rev of your phone

under the "Mobile Protocol Revision:

i have three options:

P_REV 1 (J-STD-008)
P_REV 4 (IS-95-B)
P_REV 6 (cdma2000 Rel 0) -hilighted

what do they do? and are there any beniftis to changing them?

thanks

If you are getting a error 67 on vison, Doing ##774 then hitting reset to factory default setttings, and then entering in your msl can often clear up the error 67.

to clarify ##774 is ##PRI

Thanks ShadowM
the information and chances to play a bit with this thing are fantasic
thanks for putting in the time to share the info
mra

So if your phone just sits there like a bump-on-a-log after entering the code, say ##774#. Waits 10 secs and the clears without ever showing data. That'd be abnormal? PEBCAK

I'm having the same problem. I type the codes in the dialer screen, and nothing happens after I press the last #.

I have an unlocked GSM Treo 650, if that makes any difference.

You are pressing the select button of the "D" Pad, I presume, if not that should do the trick....